Simplify3D - When printing thin walls that need extra strength you can increase the Allowed Perimeter Overlap Percentage, found in the Advanced tab. Increasing this value will define a higher preference for
![Simplify3D on Twitter: "Here is a short video of our preview mode showing the extrusion automatically being adjusted to fill the available space. https://t.co/UmXUi88QO3" / Twitter Simplify3D on Twitter: "Here is a short video of our preview mode showing the extrusion automatically being adjusted to fill the available space. https://t.co/UmXUi88QO3" / Twitter](https://pbs.twimg.com/media/Dh2VbGtXUAEvoLI.jpg)
Simplify3D on Twitter: "Here is a short video of our preview mode showing the extrusion automatically being adjusted to fill the available space. https://t.co/UmXUi88QO3" / Twitter
![Why does simplify 3D create gaps in the top layers. My infill overlap is 35%. Not an underextrudion problem. : r/3Dprinting Why does simplify 3D create gaps in the top layers. My infill overlap is 35%. Not an underextrudion problem. : r/3Dprinting](https://preview.redd.it/ka44h171fzp21.jpg?auto=webp&s=4dbbcc397f65c047b8f98abc2205a1e2550b49e1)